垃圾焚烧烟气中HCl与消石灰的反应机理研究

测试了两种消石灰与垃圾焚烧烟气中HCl的反应率,得出了消石灰的反应率与反应时间的反应曲线,分析了消石灰与HCl的反应机理及影响消石灰最终反应率的因素。试验结果表明,消石灰与HCl反应初期按灰层扩散控制进行,两种消石灰的最终反应率分别为16％和36％。     

资源型城市可持续发展能力的演变与调控

作为特殊的经济区，资源型城市的衰落与振兴日益成为社会关注的热点。本文从分析资源型城市可持续发展能力入手，论述了资源型城市发展能力的成长阶段及演变特征，提出了资源城市可持续发展能力调控的模式和途径。     

Modification of ferrite–manganese oxide sorbent by doping with cerium oxide

Fe–Mn oxide and Ce-doped Fe–Mn oxide sorbents were studied on the structural and desulfurization behavior in COS removal from syngas. The effects of cerium oxide on the Fe–Mn oxides have been investigated by XRD, BET, TPR, XPS and TEM methods. Analysis data show that the Ce-doped sorbent has larger specific surface area and better particles’ dispersion compared with non-modified Fe–Mn sorbent. The addition of Ce improves the reduction performance of Fe–Mn species. The desulfurization experiments show that the desulfurization activity of sorbent can be increased because of the promotion of the structural and redox properties by ceria doped. The Ce-doped sorbent can reduce COS from 15,000 ppmv to less than 0.1 ppmv at 325 °C and a space velocity of 1000 h⁻¹.     

用次磷酸钠废渣制备饲料级磷酸三钙

采用高温煅烧工艺，以工业生产次磷酸钠的废渣为原料，制备饲料级磷酸三钙，并对最佳工艺条件进行探讨。最佳工艺条件：煅烧温度600℃、煅烧时间20min。制得的饲料级磷酸三钙中磷的质量分数为16％～18％，符合Q／YHY01—2003《饲料级磷酸三钙》产品质量企业标准。     

Ca(OH)2解吸并固定混合吸收液中CO2的实验研究

CO₂化学吸收法分离纯度高,技术成熟,但能耗过高及成本是困扰该技术发展的瓶颈.在常压条件下对利用Ca（OH）₂直接矿物碳酸化固定MDEA/PZ混合吸收富液中CO₂进行了一系列实验研究,考察了吸收液负荷、Ca（OH）₂投加量、pH、温度及搅拌速率等因素对解吸率的影响,并利用动态吸收-解吸循环实验研究了其CO₂吸收性能和循环使用稳定性,最后对碳酸化反应产物进行了XRD、TEM分析.结果表明,在常压条件下,Ca（OH）₂可以通过液相直接矿物碳酸化对CO₂进行直接固定,并实现吸收富液的再生;随着负荷的升高及Ca（OH）₂投加量、pH、搅拌速率的增大,解吸率随之增加;随着溶液温度升高,解吸率下降;经过5次动态吸收-解吸循环实验后CO₂吸收量可以达到并保持在0.57 mol·L^-1,显示出了良好的循环稳定性.     

Density functional theory (DFT) studies of vanadium-titanium based selective catalytic reduction (SCR) catalysts

Based on density functional theory (DFT) and basic structure models, the chemical reactions on the surface of vanadium-titanium based selective catalytic reduction (SCR) denitrification catalysts were summarized. Reasonable structural models (non-periodic and periodic structural models) are the basis of density functional calculations. A periodic structure model was more appropriate to represent the catalyst surface, and its theoretical calculation results were more comparable with the experimental results than a non-periodic model. It is generally believed that the SCR mechanism where NH₃ and NO react to produce N₂ and H₂O follows an Eley-Rideal type mechanism. NH₂NO was found to be an important intermediate in the SCR reaction, with multiple production routes. Simultaneously, the effects of H₂O, SO₂ and metal on SCR catalysts were also summarized.     

A Global Overview of Atmospheric Acid Deposition Fluxes

This paper presents a summary of globalacid deposition flux data taken from a globalassessment report on acid deposition prepared forUNEP/WMO (Whelpdale and Kaiser, 1996). There is a largevariation in the spacial coverage and reliability ofmonitoring around the world. Many more stationsmeasure wet deposition than collect appropriate datafor estimating dry deposition. The widespread regionswith highest precipitation concentrations anddeposition fluxes of sulphate and nitrate coincideclosely with the regions of highest density ofSO₂ and NO_x precursor emissions occurringprimarily in the mid-latitude, northern hemispherebelt where a large fraction of the worlds fossilfuels is consumed. Organic acids in precipitation makea minor contribution to acidity (<20%) inindustrial regions, but in the rest of the world theyare of same order, or even exceed, inorganic acids.Less is known about dry deposition, but it appears topredominate near strong emission sources with wetdeposition predominating farther downwind. The molarratio of the N/S contribution to acidic deposition isclose to 1.0 over large areas of Europe and NorthAmerica, but is highly variable elsewhere, beinghighest in equatorial regions due to biomass burningand lowest near smelters and other large sources of SO₂.     

PHBV表面疏水改性用作吸油材料的研究

利用多种表面改性剂对生物可降解材料PHBV进行了表面改性实验研究，测定了不同改性剂改性后PHBV的吸油率以及温度对其吸油效果的影响，并探讨了改性机理，研究结果表明：不同改性剂对PHBV的改性效果有所差异，从疏水和吸油的共同效果来看，最佳疏水改性剂为添加量5％时的硅油，温度对未改性PHBV和改性PHBV的吸油率及吸油速度均有影响。     

烧结砖生产中氟的逸出及钙基废渣固氟特性研究

砖坯烧制过程中，氟逸出的初始温度约为600℃，大部分氟在约800℃至砖坯发生明显烧结的温度内逸出，以CaO含量高的粘土原料制砖，氟逸出量相对较少。在此基础上，提出在制砖原料中添加适量钙基废渣抑制氟的逸出，并进行了详细的实验室和工业性试验；结果表明，在适宜添加量下，存氟率由约25％增至70％以下，且不影响砖制品质量。